Find an induction cooktop for your pan and cooking plan.

This is a mode on the appliance, not a statement that any outdoor or mobile electrical setup is allowed. The exact TILLREDA black-model instructions list 200 W as its lowest selectable level.

Finish is cosmetic. Gold accents are shown for 8100MC and 9120MC; silver for 8120MC, 8310ST and 9600LS; black for the Titanium, 8500ST, 9610LS, E200A, BT-200T1/8600BI, 8620BI/BT-K35 and the page-mapped 9620LS. The current exact 9100MC/BT-M20B listing is black, although its older manual says silver. The SMEG PIC11 U.S. variants add emerald green (PIC11EGMUS) and white (PIC11WHMUS); each is a separate finish-only identity with the same reviewed one-zone probe plan. Ciarra lists Donut SKU CATIH1A-M as Midnight Dream; its current official product record maps that exact SKU to a blue/indigo depiction. CATIH1A-P/O manual codes remain separate unresolved finish configurations. The Elite Gourmet EIND57 family adds separate Black (EIND57B), Blue (EIND57BL) and White (EIND57W) finish codes; the product page does not state a functional difference among them. Ciarra's Midnight Dream remains a separate blue/indigo product identity. Equator PIC 100 now has exact Black, Silver, Lilac, Copper and Blue finish configurations with the same documented function; the exact Blue SKU/image is on Equator Canada and Lowe’s identifies U.S. model PIC 100 BLUE, but current U.S. stock is not guaranteed.

A two-zone count or identical temperature settings do not guarantee two independent peak wattage loads; compare the exact combined output limits.

The 30812 bundle adds Model 31760 bamboo steamers and utensils; the accessory guide gives separate simmer, steam-safety, hand-wash and drying directions.

The 30813 selected option adds a separately listed cookbook; the base 30803 already lists a recipe book. No recipe count is claimed.

Nuwave lists a PIC Flex option with a 9-inch Fry Pan. Its selected bundle SKU is distinct from the base offer; pan material and magnetic-base details are not published in the selected item list.

Nuwave lists a separate PIC Flex with 4 QT Pan option. Its image shows a lid, but the itemized list does not confirm that a lid is included.

A historical app feature is not enough if today’s app, phone, or recipe service cannot be confirmed. Bluetooth monitoring or an ordinary temperature control is not the same as guided steps that change settings.

This is different from a wired probe and from the cooktop Temp mode, which measures the cookware base. The Max Burton 18XL manual identifies its included wireless probe and limits its use to Temp Level or Program Cooking.

An interface disk lets most compatible non-induction metal cookware couple through the induction zone, but can reduce transfer efficiency, becomes very hot, and is not a promise that every pan works. The older Max Burton #6015 and #6050 set sheets identify the disk in their packages; loose #6000/#6200 sheets say it is an accessory sold separately.

The exact SPT -42B bundle pages name an HK-4200B 3.5 L stainless-steel pot with glass lid. Keep the -42B suffix; a bare cooktop page is a separate identity, and unknown package contents do not meet an essential included-pot need.

A control lock can inhibit accidental setting changes, but it does not cool the glass or replace supervision.

The original listing describes three pots with glass lids and a 9.5-inch skillet. SINCFS1 is discontinued; for a used offer, verify that every piece is actually included.

DP-CHEFTOP-1-A-PN is labeled Curved (Includes Pan). The maker does not identify the pan model or size; this only checks the selected offer’s package label and does not promise pan compatibility.

DP-CHEFTOP-1-B is labeled Edged (Includes Stainless Steel Pot). The maker does not identify the pot model, capacity or magnetic base; this is a package-label filter, not proof of vessel fit.

SBSET and DBSET are distinct package identities. Each manufacturer page lists a ten-piece cookware set, but DBSET’s page conflicts on burner count and neither bundle page identifies the included cooker model. This question confirms only the named set, not the cooker’s configuration.

For Titanium, use the Owner Manual’s conservative 10-inch guidance; the PIC Diamond 30592LW guide recommends 3–10 inches. TILLREDA’s linked instructions recommend a 120–200 mm cookware-base range; that is not a verified maximum outside-rim width. The Max Burton #6000/#6200 manuals recommend a 13-inch maximum pan diameter. Unknown overall-pan limits do not pass an essential width requirement. The Hamilton Beach 34104 manual specifies 4–10-inch cookware diameter; its FAQ calls the same figures a radius, so treat that as a source conflict rather than a pan-base measurement.

Leave blank unless you need a measured limit. The reviewed Titanium page and guides do not state its cord length; unknown cannot meet an essential minimum.

Enter the greatest minimum wattage your routine can accept. For example, 150 requires a documented mode at or below 150 W; the E200A and newer 9600LS/9610LS documentation start at 100 W, while TILLREDA, 8500ST and the 8100/8120/9100/9120 families start at 200 W. A lower required minimum is not inferred from a model page. Ciarra CATIH1-OW’s linked CATIH1 manual lists a 100 W first step; Donut CATIH1A-M begins at 200 W. Tuco TUCO-PIC-BW lists 60 W as its lowest of ten Power-mode levels; individual watts for the remaining steps are not published.

Optional. Set a floor only if the cooktop’s listed maximum output matters to your routine. This is a rating, not a tested cooking-time promise; check the exact supply and manual. ChangBERT’s F-IH-01SS is listed at 1,800 W and F-IH-02SS at 3,200 W, but the latter requires a documented 240 V / NEMA 6-15P arrangement.

Leave blank unless timer range is essential. The exact 80070CT manual documents a 99:59 timer, but also says the appliance is not meant for continuous use and must not be left unattended; its long maximum does not authorize unattended use. Duxtop 9620LS/BT-350DZ and 9600LS/9610LS manuals document 10 hours; PIC Diamond 30592LW Quick Start gives 99:59; other shorter or unknown maxima do not meet an essential duration. Hamilton Beach 34104 documents up to 150 minutes; the discontinued 34102 TS02 guide documents 120 minutes. Ciarra’s linked CATIH1 family manual lists 180 minutes; CATIH1A-P/O/M Donut instructions list 240 minutes. A long timer does not authorize unattended cooking. Tuco TUCO-PIC-BW lists minute-by-minute adjustment up to 24 hours (1,440 minutes), but its included manual is not publicly downloadable from the product page; a long timer does not authorize unattended or continuous cooking. The advanced input permits 1,500 minutes so you can distinguish 24 hours from a requirement just beyond that claim.

Optional. This is not the timer duration. Leave blank unless the cooktop must stay paused for a defined minimum time before it shuts down.

Use the cookware base diameter, not its top rim. The E200A, Duxtop 8100MC/8120MC, 8500ST, 9100MC/9120MC and 9600LS/9610LS manuals require at least a 5-inch flat magnetic base; Nuwave PIC Titanium instructions give a 3-inch minimum. The black TILLREDA instructions recommend 120–200 mm (about 4.7–7.9 in) for the base. Unknown minimums do not pass. Ciarra CATIH1-OW page/manual diameter entries conflict; its matcher uses the narrower page-feature minimum. The Donut page lists a 4.7–9.4 in reference, narrower than its shared manual interval.

Optional. Enter the largest documented step size you can accept. A 5°F setpoint increment is finer than 10°F; leave blank if you do not need this control. Unknown increments do not meet an essential limit. Ciarra CATIH1-OW and Donut CATIH1A-M have maximum adjacent setpoint gaps of 80°F and 70°F respectively; neither meets a stricter maximum-step value.

Optional. Enter the highest setpoint you need the control range to reach. This is a cooktop setting, not a pan-surface or food-temperature measurement; an unknown maximum cannot satisfy an essential requirement. BMC800 manuals list a selectable 482°F Pan Temperature setting, although one embedded Settings field on its product page says 428°F; see its review for the distinction. Probe Control is capped at 392°F. Ciarra CATIH1-OW and CATIH1A-M manuals list 460°F maximum cooktop selections; they do not document food-probe measurement. Tuco TUCO-PIC-BW lists a separate ten-level 140–450°F setting range, but the page does not describe its increments or measurement method.

Optional. Enter a minimum only if an uninterrupted heating session is essential. This is separate from the countdown timer. Drinkpod ChefTop 1-A and 1-B manuals say the unit shuts off after two hours and advise not operating it continuously longer than two hours; unknown session limits do not satisfy an essential duration.