Your needs, this model
Does it fit your priorities?
Must this package supply the #6010 interface disk alongside the Deluxe #6200?
Yes. The #6050 sheet and 2016 catalog both identify the #6200 and #6010 as the set contents; a loose #6200 does not establish that accessory.
Explore this need in the finder →Is the #6050 a single cooking zone rather than a two-pan arrangement?
It contains one #6200 cooktop. The accessory disk provides cookware coupling, not a second heating element.
Explore this need in the finder →Can its conservative 4.5-inch base minimum and 180-minute timer meet a five-inch/three-hour need?
The set sheet gives a 4.5-inch minimum and 180-minute timer; the exact #6200 manual has a less conservative four-inch base statement, so the finder uses the product-sheet boundary.
Explore this need in the finder →The #6050 is the #6200 plus a separate cookware path
The Max Burton #6050 is not a double-burner model. Its exact product sheet names the Induction Set as the Deluxe #6200 cooktop and #6010 interface disk boxed together; the 2016 Aervoe catalog repeats that set description. The detail worth comparing is therefore package contents. The underlying cooker remains one zone, and the disk does not heat a second pan independently.
The included #6200 has a stainless outer body and a 120-volt, 1,800-watt rating. Its data sheet lists ten power levels, ten temperature settings between 100°F and 450°F, and a 180-minute timer. The manual documents a single countertop induction zone with a dedicated-outlet instruction and ventilation clearance. It is an older appliance rather than a confirmed current product, so this review helps identify the kit or compare an exact package—not establish today’s availability, service or price.
For a magnetic pan, the #6200 works in its ordinary induction arrangement. For some nonmagnetic metal cookware, the supplied #6010 disk provides another route: the disk rests on the cooker, and the pan rests on the disk. That is different from a pan directly inducing heat. The maker describes the disk as an eight-inch assembly of two stainless plates with an aluminum layer and a heat-resistant handle. Its sheet says it works with most non-induction cookware, including aluminum, copper and nonmagnetic stainless steel, but also warns that efficiency varies with pan type and heat transfer. It is a useful compatibility accessory, not a promise for every pot.
Pan fit and adapter limits are separate questions
The #6050 product sheet states a 4.5-inch minimum flat magnetic cookware base. The included #6200 manual gives a four-inch minimum instead. For the ordinary pan-base matcher, the more conservative 4.5-inch sheet value is used and the conflict remains visible; someone with a four-inch pan should not infer qualification from the more permissive manual alone. This specification applies to the cooker’s magnetic-pan detection. The source does not give a separate minimum pan base for a nonmagnetic pan on the eight-inch disk, so do not reuse the cooktop number as an adapter guarantee.
The #6010 disk is not a way to use any material indiscriminately. The 2016 catalog says not to use it with glass or ceramic cookware, and it notes restrictions for a different commercial cooktop and some higher-powered built-in induction ranges. The #6050 is explicitly paired by the manufacturer with a 120-volt household #6200; this review does not transfer the catalog’s separate built-in warning into a new #6050 prohibition. What is clear for this set is that the disk surface becomes very hot and that the adapter can reduce heat-transfer efficiency. Handle the accessory by its own handle only after following the exact supplied instructions; the separate disk instruction leaflet was not located in this pass.
There is also a power-range conflict. The #6050 product sheet says 500–1,800 watts, while the exact #6200 manual’s level table lists 200 watts at the first level. The review does not conceal this conflict or use it to claim a guaranteed ultra-low simmer. The timer is listed up to 180 minutes; it does not turn the cooktop into a staged cooking program.
Choose according to what is in your cupboard
If your current cookware is magnetic and flat, the loose #6200 assessment may be the simpler comparison; the disk is an extra item you may not need. If you want to preserve some aluminum, copper or nonmagnetic stainless cookware, #6050 is the exact package code to check, not just “Max Burton 6200.” A product-card illustration can show components without proving they were in a marketplace box, so verify the #6050 label and disk before buying a used unit.
The finder’s earlier-model opt-in is necessary. A requirement for the #6010 disk selects the package configuration, while a two-zone requirement rejects it. A 180-minute timer need fits; one longer than the documented limit does not. A silver-finish preference helps distinguish #6050 from the black #6015 kit, but it does not establish stock or condition. The 8-inch disk diameter is not a maximum pan-rim measurement, and cookware shown in the #6200 manual or catalog is not listed as part of this set. The 2016 catalog explicitly marks cookware as not included.
Limits before using an old set
No present sales page, in-stock status, remaining warranty or repair support was established here. A box that lacks the exact set label may be a base #6200 without the adapter. Before relying on the appliance, check the rating label, glass and cord, obtain the instructions that match it, and use the dedicated outlet and ventilation directions in the #6200 manual. Do not treat this older kit as a substitute for a current model with a documented pan limit or verified contemporary supply. The exact #6050 sheet, #6200 manual, #6010 accessory sheet and 2016 catalog are linked for model-level comparison.
Aervoe #6050/#6200 Product Data Sheet 76200 · Max Burton #6200 operating instructions · Aervoe #6010 interface-disk sheet · Aervoe 2016 catalog
Key details at a glance
| Simultaneous cooking zones | 1 |
|---|---|
| Built-in installation documented | No |
| Documented placement options | countertop |
| Maximum listed power | 1800 W |
| Body depth | 13.3 in |
| Body width | 12.5 in |
| Body height | 2.6 in |
| Listed unit weight | 6.75 lb |
| Power-cord length | 5 ft |
| Listed voltage | 120 V |
| Listed manufacturer's warranty term | 1 year |
| Minimum cookware base | 4.5 in |
| Included #6010 interface disk | Yes |
| Interface disk diameter | 8 in |
| Non-induction cookware via disk documented | Yes |
| Temperature Mode minimum | 100 °F |
| Temperature Mode maximum | 450 °F |
| Temperature settings | 10 |
| Countdown timer maximum | 180 min |
| Listed supply voltage | 120 V |
| Listed unit weight | 6.75 lb |
| Cooktop finish | Silver |
| Zone heating technologies | induction |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Paper, software and setup details
Warranty start and exclusions note
The archived 2014 sheet states a one-year performance warranty from purchase; current coverage is unknown and is not used for matching.
Sources for this assessment
Choose for the cooking setup you will use.
Compare exact model controls, zone count, pan fit and operating limits—not only headline wattage.
