SPT SR-1883G-42B Gold Cooktop + HK-4200B Pot review

SPT's exact SR-1883G-42B page describes a package combining the gold-trim SR-1883G induction cooktop and the HK-4200B 3.5-liter stainless-steel pot with glass lid. The model suffix distinguishes this package from the bare SR-1883G cooktop. The manufacturer page marks the bundle out of stock in its discontinued-cooktop category as checked on October 23, 2026; the review preserves it for exact-model comparisons and resale checks rather than implying current SPT stock.

Know what the bundle adds—and what it does not

The included HK-4200B is cookware, not another heating element. The cooktop remains a single induction zone with 1,650W maximum input at 120V/60Hz. SPT describes the pot as induction-ready and usable on all stove types, with a flat bottom, 0.5mm grade-201 stainless-steel body, tempered-glass lid, riveted handles and dishwasher-safe construction. Its listing gives a 3.5L capacity and dimensions of 3.3 inches deep, 10.2 inches in diameter and 12.6 inches handle-to-handle; the listed unit weight is 2.2 pounds.

One picture caveat is worth stating plainly: the official SR-1883G-42B image asset currently shows the gold cooktop, not the included pot. The exact package description names the HK-4200B, and the exact cookware page describes that component. Treat the written contents list as the source for what this package was defined to include; do not decide that no pot is included because the image omits it. The 10.2-inch pot diameter also is not identified as a flat magnetic-base measurement. SPT does not give the bottom diameter in the pot listing, so that value should remain unknown.

Gold finish is a preference, not a performance claim

The exact page and official image identify a black-glass unit with gold-colored trim and controls, and the shared SR-1882/SR-1883G/S manual cover labels SR-1883G as Gold. SPT's silver sibling, SR-1883S, uses the same family manual and listed functions. The source set does not support treating the gold finish as a different wattage class, zone count, cookware range or temperature system. If the pot is the key requirement, keep the exact -42B SKU in a search; if you already have cookware, the bare SR-1883G is the corresponding model page without an included pot claim.

Be cautious with the low settings

The nine power labels run from 100 to 1,650W, but SPT says the first three are simulated with intermittent 700W heat: one second on and six seconds off for the 100W choice, three/four for 300W, and five/two for 500W. That is a selectable low setting, not continuous 100, 300 or 500W operation. If gentle heat needs to be sustained without those pulses, this package is not a documented answer. The included pan does not change the underlying induction cycle.

SPT's exact cooktop page lists thirteen Warm choices and includes 300°F; its linked family manual calls the mode Temp and lists 320°F at that intermediate point. Both sources give the same thirteen-setting count and 100–390°F endpoints, but they conflict on this value. The manual control diagram shows a Mode/Function control that changes between Cook and Temp; it does not depict a clearly separate Keep Warm shortcut. This is a setpoint mode, not a wired food probe or a claim of measured pan temperature.

Use the cooktop manual for the rest of your cookware

The shared manual says cookware should be flat-bottomed and ferrous, with a base between 4.75 and 10.25 inches. Measure the magnetic base, not the rim of the pot or skillet. For ordinary pans outside the package, a five-inch base is within the stated range and 4.5 inches is below it. Because the HK-4200B listing gives only its diameter rather than a separate base measurement, do not reuse that overall diameter as a confirmation of the manual's base-size rule.

The cooker can heat one standard flat pan at a time. The manual requires a flat indoor counter, four inches of clearance around the unit and an individual 15-amp outlet; it limits use to household settings and says not to operate outdoors. Its maximum countdown is 9 hours 59 minutes and the timer stops the appliance at expiry. That shutdown feature does not authorize leaving a cooking appliance unattended. SPT lists the SR-1883 body at 11.25 × 13.75 × 2.36 inches and 5.1 pounds, but does not give the cord length on the checked page.

Choose the right exact configuration

The SR-1883G-42B suits someone who wants the gold-trim single burner and the specifically named 3.5L HK-4200B pot as part of one earlier package identity. It is not a double burner, a specialized wok-only system or a different-power version of the SR-1883G. If silver trim is preferred, the SR-1883S-42B is the parallel package; if the pot is not needed, compare the base models instead. For a current-reference SPT option, the SR-1886BK has a different manual, wattage and much narrower cookware-base guidance, so do not transfer the SR-1883 numbers to it.

SPT's shared manual states a one-year U.S. materials/workmanship guarantee from purchase, subject to its terms, but this old package page does not establish remaining warranty, support or parts access. Verify the exact SR-1883G-42B marking and physical condition in a secondary listing. The manufacturer package image's omitted pot and the page's written inclusion should both be kept in view; no independent box inspection or cooking test is claimed here.

SPT SR-1883G-42B package page · SPT HK-4200B pot page · Shared SPT SR-1882/SR-1883G/S manual