SPT SR-1885SS 1650W Touch Induction Cooktop review

The SPT SR-1885SS is a one-zone, 1,650-watt countertop induction cooktop with a touch-sensitive panel. Its manual matches the exact model code, which makes the documented pan and counter requirements more useful than details borrowed from a look-alike SPT. It is a better fit for one-pan cooking when you want several labeled settings and a long timer than for two-pot meals, continuous very-low heat, or an installation plan that depends on a built-in cutout.

The touch panel gives choices, but five low labels pulse

The product page and model-specific manual list thirteen Cook settings from 100 to 1,650 watts and thirteen separate temperature settings from 100°F to 390°F. The 100–500-watt selections are not continuous outputs: the manual says the cooktop cycles its 650-watt minimum on and off. For example, its 100-watt label means one second of 650-watt heating followed by six seconds off; the 500-watt label cycles five seconds on and two seconds off. That may suit a recipe that tolerates cycling, but it is not a promise of smooth, uninterrupted low heat. If a gentle simmer or melting task is essential, treat these figures as labeled modes, not as a laboratory measurement of pan temperature or average power.

To cook, the manual has you power on, select Cook or Temp with the Function key, and adjust with plus or minus. The separate temperature mode is useful when you want a specific cookware setpoint rather than only a wattage label. It is still a cooktop control, not an included food probe. The manual lists 13 discrete temperatures and warns that ambient conditions, cookware and food can cause readings to vary by about 20°F. Do not choose it as a measured internal-temperature system. A control lock is listed, and the product page describes automatic pan detection.

One zone, with concrete pan and counter limits

This is a single cooking zone. The 1,650-watt maximum is a higher listed ceiling than SPT’s compact 1,300-watt SR-964 models, but it does not add a second pan position. The exact manual says to use a flat ferrous base between 4.75 and 10.25 inches; a magnet test is offered as a compatibility check. Measure the flat magnetic base, not the pan rim. The upper limit is a cookware-base measurement, so it should not be reinterpreted as a recommendation for a 10.25-inch overall pan diameter.

At 11 by 14.25 by 2.5 inches and 5.55 pounds, it is still a countertop appliance to move and store, not an installed hob. The manual says to leave four inches of clearance around it for ventilation and to use a dedicated 15-amp outlet rather than sharing it with other appliances. Those are meaningful planning details, but they do not establish a countertop cutout. Do not block the intake or exhaust openings, and wait for the cooling fan to stop before unplugging. The manual states household use only and says not to use the appliance outdoors.

Timer, warm settings and cookware care

The countdown reaches 9 hours 59 minutes. At the end of the countdown, the exact manual says the unit stops operation, beeps and returns to standby; this is not a delayed-start timer. The ceramic plate may retain heat after the pan comes off, so the manual says to allow it to cool before wiping it with a soft damp cloth. Do not immerse the cooktop. It also warns against heating an empty pan, which matters when selecting a preheat habit for an induction surface.

Base cooktop or the supplied-pot package?

The base SR-1885SS listing does not establish an included HK-4200B pot. SPT sells the distinct SR-1885SS-42B package, whose exact page names the same 1,650-watt cooktop plus one 3.5-liter stainless-steel pot with a glass lid. Choose the package if receiving that named vessel is part of the purchase need; choose the base configuration if you already own compatible induction cookware. A pot in the box is not another burner, and the package still supports just one active cooking zone.

Compare the SR-1884SS if a rotary control knob is more important than a touch-only adjustment strip: its exact page and manual document the knob, while sharing this family’s headline power and pulsed low labels. If a second pan is essential, consider a documented dual-zone model instead. For a smaller or lower-watt SPT option, the SR-964TS and SR-964TB reviews describe separate 1,300-watt cookers; their manual-suffix questions should be read on their own pages, not carried over to this exact-model manual.

SPT SR-1885SS product page · SPT SR-1885SS-42B package page