SPT SR-964TS-42B 1300W Induction Cooktop and HK-4200B Pot Package review

SPT’s SR-964TS-42B is not just another name for the bare SR-964TS listing. The manufacturer assigns the combination its own SKU and explicitly describes a package containing the silver SR-964TS 1,300-watt induction cooktop and the HK-4200B 3.5-liter stainless-steel pot with glass lid. The bundle is useful when that exact pot is part of the need; it does not change the cooktop’s one-zone layout, output ceiling or controls.

The package is one cooker plus one named vessel

The -42B page links separately to the SR-964TS cooktop and HK-4200B cookware pages. The latter describes a 3.5 L pot with a tempered glass lid, a flat bottom, riveted handles and a 0.5 mm grade-201 stainless-steel body. SPT says it is dishwasher safe and suitable for all stove types, including induction. Published body dimensions are 3.3 inches deep and 10.2 inches in diameter; the handles span 12.6 inches. Those are the maker’s pot dimensions, not a measured magnetic-base diameter, and this review does not infer a pan-fit limit from the overall diameter.

That exact included pot can remove an extra cookware-selection step for a household starting with induction, provided a 3.5-liter vessel suits the food and quantity. It is not a complete cookware set. A single pot still means one active cooking zone, and a shopper who already owns compatible cookware may prefer to compare the unbundled SR-964TS instead. The manufacturer’s listing is the evidence for package contents; the product graphic itself is a clean-background cooktop-and-pot composition, not proof of how the components were photographed.

What the cooktop keeps—and what the bundle does not add

SPT’s SR-964TS product page lists 120 V / 60 Hz input, 1,300 watts maximum, seven Cook levels and thirteen discrete Warm settings from 100°F to 390°F. A timer is listed up to eight hours, alongside touch controls, a control lock, an LED display and automatic pan detection. The low 100- and 300-watt labels are specifically described as simulated by cycling 500-watt heating: two seconds on and eight off for the 100-watt choice, and six on and four off for 300 watts. The page does not promise smooth continuous output at either label.

These controls remain the same as on the bare SR-964TS. The pot bundle does not establish a higher wattage, a second zone, a food probe, a temperature reading inside the food, or built-in installation. Its separate Warm setpoints should not be mistaken for a probe-based cooking mode. If any of those capabilities is essential, choose a model whose exact package and instructions establish it rather than relying on the bundled vessel.

A manual-link mismatch limits the fit claims

The cooktop page links a six-page instruction PDF whose cover calls the appliance SR-964T, not SR-964TS. Although the manual describes a 1,300-watt 120-volt cooktop and an induction cookware-base range, the suffix mismatch is a real bridge issue. The exact SR-964TS page itself does not give a minimum or maximum pan-base diameter, cord length or built-in plan. I therefore leave those numeric and installation requirements unconfirmed rather than importing a neighboring model’s directions. The pot bundle page confirms that the HK-4200B is sold with this cooker as one package; before relying on any particular base-diameter or clearance rule, read the current instructions and rating label supplied with the actual unit.

For the vessel, the separate HK-4200B page says induction-ready, but does not provide the size of its flat magnetic base. Its 10.2-inch diameter and 12.6-inch handle span should not be substituted for that measurement. The bundle is a reasonable documented pairing, not a universal guarantee that every pan of a similar outside diameter will work. The cooktop’s manual-link discrepancy also means an exact cookware limit cannot be used here as an essential match.

Choosing the bundle versus the base model

Choose the SR-964TS-42B when you want the maker’s specific HK-4200B pot included and a single 1,300-watt portable zone fits the way you cook. Choose the bare SR-964TS if the cookware question is already settled and you do not want to make an included-pot package essential. Neither selection should be expected to handle two pans simultaneously. The smaller overall output ceiling also makes this a different tradeoff from SPT’s higher-power single-zone models; compare the documented controls, exact pan requirements and installation plan rather than assuming that wattage is the only change.

The manufacturer product page presents the current package as an offer, but this assessment makes no claim about a seller’s present stock, a price, a remaining warranty or availability of service. For an exact listing search, retain the full SR-964TS-42B code and HK-4200B component name: the suffix marks a package identity, not a second burner or a higher-output version. Buyers who need a specific finish can also distinguish this silver package from SPT’s separately listed black- or gold-trim 42B combinations; those are separate configurations and should not be treated as visually interchangeable.

SPT SR-964TS-42B package page · SPT SR-964TS cooktop page · SPT HK-4200B pot page · SPT-linked SR-964T manual (suffix differs)