SPT SR-964TB-42B Black Induction Cooktop and HK-4200B Pot Package review

SR-964TB-42B is a package identity, not a different burner: SPT’s exact page names a black SR-964TB 1,300-watt cooktop together with an HK-4200B 3.5-liter stainless pot and glass lid. The added value is the named cookware supplied with the cooker. It does not add a second zone, increase the wattage, or document a built-in installation. Keep this package separate from the base SR-964TB listing, whose own page does not confirm that pot as included.

What the package does and does not settle

The exact package page identifies both components and links to the base cooker and pot pages. The component description calls the HK-4200B a flat-bottomed, induction-ready vessel with a tempered-glass lid and riveted handles. Its specification page lists 3.5 liters, grade-201 stainless steel with a 0.5 mm body, dishwasher-safe status, an outside body diameter of 10.2 inches, 3.3 inches deep, a 12.6-inch handle-to-handle span, and 2.2 pounds. Those dimensions are useful for storage and counter planning, but SPT does not give a separate magnetic base diameter in those measurements. Do not turn the 10.2-inch body diameter into a claim about the cooker’s exact pan-base limit.

The package is a practical fit for a shopper who needs that specific vessel as well as a compatible induction zone. It is less useful if the kitchen already has a suitable flat ferromagnetic pan or if a wider/deeper vessel is essential. A 3.5-liter pot is not a large stockpot; think about the amount of food and the listed body/handle dimensions rather than reading “included pot” as “all-purpose cookware set.” The package page specifies one pot, not a second pan or accessory bundle.

The cooker remains a one-zone, 1,300-watt model

SPT’s exact SR-964TB cooker page lists 120 V / 60 Hz input, one induction ring, seven Cook selections from 100 through 1,300 W, thirteen discrete Keep Warm values from 100°F through 390°F, a touch panel with lock, LED display, automatic pan detection, and a timer up to eight hours. The low end needs a careful read: SPT says 100 W and 300 W are simulated by cycling 500 W for two seconds on/eight seconds off and six seconds on/four seconds off, respectively. That is not steady 100- or 300-watt heat. The separately listed Warm choices are not described as calibrated food temperatures, and an included food probe is not established.

Because the exact package’s cooktop component is the same SR-964TB SKU, the package does not solve needs for dual-zone cooking, higher peak power, confirmed probe use, or a documented low continuous output. One pan occupies the only cooking ring. If the desired cooking plan requires two active pans or a different electrical installation, this package is not transformed into a fit by the pot being included.

Why the package can match when the base offer cannot

Questionnaire answers should change the recommendation here. A person who selects black finish and one zone can consider the base cooktop and the -42B package. If that same person marks the exact HK-4200B pot as essential, only the package page establishes it; the bare SR-964TB facts leave pot inclusion unknown. An unknown inclusion must not pass an essential cookware requirement. A silver requirement instead points to the separately documented SR-964TS-42B package, which includes the same named pot with a different cooktop finish. A dual-zone requirement rejects both single-zone package variants.

The cooker page lists an eight-hour maximum timer. That can help a planned long recipe, but a nine-hour minimum need is beyond the published figure, and SPT’s page does not establish what happens to heat at timer expiry. The panel’s control lock and automatic pan detection are listed features, not a substitute for checking instructions, safe placement, or food-temperature control. SPT’s exact page offers model-level information; it does not prove stock at any retailer, remaining warranty, or service availability.

Manual and fit limitations still matter

The instruction link on the exact cooker page opens an SPT PDF titled SR-964T, not SR-964TB. Its suffix mismatch makes it unsafe to transfer manual-only clearances, pan-base limits or operating details to this package as if they were confirmed for the B model. The exact SR-964TB page lists body dimensions of 11.81 by 14.17 by 2.48 inches and a net weight of 4.5 pounds. The linked SR-964T PDF gives 5.06 pounds, so a normalized unit weight remains unresolved. Use the nameplate and paperwork supplied with the exact unit before making a tight fit, clearance or circuit plan.

The SR-964TB-42B suits someone who wants SPT’s exact black single-zone cooker and the specifically named 3.5-liter pot in one package. It is not the choice for buyers who already own cookware and want only the base unit, need two cooking zones, require a verified pan-base range, or cannot accept pulsed low settings. Compare the base SR-964TB assessment if the pot is unnecessary, the silver SR-964TS-42B if finish matters, and higher-power SPT models only against their own cookware and installation documentation.

SPT exact SR-964TB-42B package page · SPT SR-964TB cooktop details